The Henry Ford
Henry Ford Museum Greenfield Village IMAX Theatre Benson Ford Research Center Ford Rouge Factory Tour
Explore & Learn

pic archive  
  Heebner & Sons two-horse treadmill type horse
power, about 1900

  Owen, Lane & Dyer portable steam
engine, about 1857

May 2007

Horse Power!

How much horsepower really comes from a horse?  While the answer to this may seem obvious, it's actually fairly complicated.  The most complete answers start out with “it depends.”

Much of farming is strenuous, tedious, repetitive work.  For American farmers, chronic labor shortages made the effort of farm work all the more taxing, so they were very interested in finding ways to get farm work done with less man-power.  Horses and oxen were the main source of power and had been used for centuries for plowing.  Improved farm machinery throughout the1800s added the power of horses to other activities such as planting, cultivating, and eventually, mowing and harvesting.  Farmers understood the effort required for these tasks in terms of the number of horses needed to pull the equipment, such as one horse for a cultivator, and three or more for a harvester or large plow.  Applying the power of horses to farm work helped to steadily increase the productivity of American farms throughout the 1800s.




MORE:  Horse Power!


Yet horsepower as a measure of power pre-dates the mechanization of the farm.  It was developed by James Watt in the 1780s as a way to measure the output of a steam engine.  Horsepower was based on his observations of how much work a horse could do in a normal ten-hour day, pulling the sweep arms of the horse-powered pumps that were used to remove water from mines.  This figure worked out to 33,000 foot-pounds per minute, or the effort required to raise 33,000 pounds of water one-foot in one minute.

As farmers mechanized barn or farm yard work like threshing, winnowing, corn shelling and corn grinding, they began to use stationary power sources—either treadmills and sweeps powered by horses, or steam engines.  Here, the agricultural idea of horsepower and the industrial idea of horsepower bumped heads.  A steam engine, such as the circa 1857 Owen, Lane & Dyer in our new Agricultural Gallery in Greenfield Village is rated at ten horsepower.  The circa 1900 Heebner two-horse tread power uses, well, two horses.  Yet each of these power sources could be used to run the same piece of farm equipment.  Some farmers came to use a rule of thumb for farm equipment, calculating that one horse was worth about three horsepower in an engine. Why is this?

Engine horsepower ratings (and there are many varieties of these) are typically over-estimated because they are often calculations of the power delivered to the machine—not how much actually reaches its “business end.”   For example, they don't account for power losses that occur between the piston, and whatever the piston is driving—which can be more like 70% to 90% of the rated horsepower.  In addition, those measures are made at the ideal engine speed.

On the other hand, various studies have shown that peak horsepower for a horse (sustainable for a few seconds) is as high as 12-15 horsepower.  This is based on calculated estimates, as well as observed estimates (a 1925 study of the Iowa State Fair's horse pull).  Over the course of a 10-hour workday, however, the average output of a horse is more along the lines of one horsepower—which coincides with James Watt's original way of describing horsepower.

So how much horsepower comes from a horse?  As we see, it depends.  If we measure it in an optimal way, as we do with engines, it is as high as 15 horsepower.  If we measure it as James Watt did—over the course of a long 10-hour day, horses walking in a circle—it gets down to one horsepower. 

Nineteenth century farmers quickly learned that if they were buying an engine to do a task that a horse had previously done, they needed an engine that was rated for three horsepower for every horse they had used for the task.

-- Jim McCabe, Acting Curator of Agriculture

This March 1860 advertisement from Country Gentleman magazine shows a thresher-separator powered by a two-horse treadmill horse power.  A steam engine could also have been used to operate the machinery.

A portable steam engine powers the thresher-separator in this photograph, likely taken in the 1880s or 1890s.


Copyright © 2015 The Henry Ford
The Henry Ford is an AAM accredited institution. The complex is an independent, non-profit, educational
institution not affiliated with the Ford Motor Company or the Ford Foundation.