Past Forward

Activating The Henry Ford Archive of Innovation

A Horse-Drawn Recycler

November 13, 2015 Archive Insight

Manure spreader made by International Harvester, about 1905

The act of farming draws nutrients from the soil. If the nutrients are not returned, the soil will become depleted and lose productivity. One of the best ways to restore the soil is to recycle what was removed from it by spreading manure on it. This International Harvester Manure Spreader made a dirty job not-so-dirty.

Caring for the Land: Forgotten – Then Re-discovered

To the Europeans who settled colonial America, the availability of land seemed limitless.  Farmers paid little attention to caring for the soil, quickly abandoning the fertilizing activities they had practiced in Europe. These farmers felt it more cost effective to simply move on to new land when the soil lost productivity, rather than put in the effort to restore its fertility.

This circa 1875 manure or spading fork has a short handle so it can be used in a stall, wagon or other confined area. The worn tines are a testament to years of use. THF89809

By the 1800s, this strategy had begun to run its course. As land went fallow, first in the east, and later in the Midwest and plains, American farmers had to re-discover the soil stewardship practices they had lost generations earlier. Since much of the grain grown on a farm is fed to livestock, they began to gather up barnyard manure from cows, horses, pigs and other livestock, and spread it on their fields to restore the soil’s fertility.

The Dirtiest of the Dirty Jobs

Spreading manure is one of the most unpleasant and labor-intensive jobs on a farm.  It requires a lot of effort and a strong constitution to scoop up raw manure and straw bedding from the barnyard and stalls into a wagon, and then fork it out evenly over many acres of fields.  Spreading manure needs to be done properly to be effective. Too much manure in one spot could “burn” the soil, so clumps needed to be broken up before they were tossed on the field.

David C. Voorhees, a farmer in Somerset, New Jersey, wrote in his diary of spreading 215 loads of manure in September 1875, following the harvest. If ever there was a farm task that was ripe for mechanization, it was spreading manure. Throughout the 1800s, dozens upon dozens of patents were issued for manure spreaders. By the 1870s, the design of manure spreaders was sufficiently refined, and the manufacturing process was developed enough that manure spreaders were both effective and affordable.

The beater on this circa 1905 manure spreader broke the manure up into small pieces, and spread it evenly on the field. THF89811

This pamphlet from collections of The Henry Ford describes the operation of a manure spreader for farmers that might be unfamiliar with their operation and includes many testimonials. The Kemp Company was absorbed by International Harvester in 1906. THF125272

How to Make the Manure Fly

The more successful manure spreaders had two key design features: a continuously moving apron or floor which automatically moved the manure toward the back of the wagon to be spread; and a beater at the back of the spreader to pulverize the manure and spread it evenly across the field. With a good manure spreader, one person could do the work of five or more. And those other four people were surely happy to do some other job.

A Remarkable Survivor

If spreading manure was hard on farmers, it is even harder on farm equipment. since the manure rapidly corrodes and rots the parts of the manure spreader. Consequently, early manure spreaders rarely survived to be passed on to the next generation, much less make it into a museum.

Henry Ford Museum’s circa 1905 International Harvester Manure Spreader No. 3 is one of these very rare survivors. It is all the more extraordinary, because it retains its original paint and parts.  It is an excellent example of the prevailing manure spreader design of the early 1900s.

A Sustainability Hero

In many ways, farm practices can work against nature. The manure spreader is a great example of a tool that helped the farmer reestablish the natural cycle, by recycling the bounty of the soil back into the soil.

The manure spreader does the dirtiest job on the farm – but it is the key part of making farming a sustainable undertaking.

Jim McCabe is former Acting Curator of Agriculture and The Environment at The Henry Ford.

farming equipment, horse drawn transport, Henry Ford Museum, farms and farming, environmentalism, by Jim McCabe, agriculture

Facebook Comments