“Sunshine Special,” the 1939 Lincoln limousine modified for official use by President Franklin D. Roosevelt, as it appeared circa 1942. (THF208669)

Editor’s Note: In connection with the exhibit Enduring Ideals: Rockwell, Roosevelt & the Four Freedoms, now showing at Henry Ford Museum of American Innovation, the following excerpt is adapted from The Sunshine Special: FDR’s 1939 Lincoln K Series Presidential Limousine by Brody Levesque. The complete book is available at the Benson Ford Research Center.

A Unique Car Built Expressly for a President
One of the first things that a visitor notices when viewing the presidential vehicles at Henry Ford Museum of American Innovation is the size of the 1939 Lincoln K Model limousine custom built for President Franklin D. Roosevelt. The car is massive. In fact, it weighs in at over 9,300 pounds and has an impressive wheelbase of 160 inches.

In 1937, Ford Motor Company president Edsel Ford lobbied to obtain a government contract to provide a presidential limousine for FDR’s use.  He wanted to regain a presence in the White House Garage and particularly to have Ford Motor Company’s prestige Lincoln division as the primary choice for presidential conveyance. Edsel Ford also knew that FDR liked his company’s cars.

Roosevelt, who was beginning the second of his four presidential terms, personally owned a 1938 Ford V-8 convertible coupe for his use at The Little White House in Warm Springs, Georgia, along with a 1936 Ford V-8 Phaeton convertible at his home in Hyde Park, New York. Both cars were equipped with special hand-operated controls so that FDR, whose paralytic illness prevented the use of his legs, could drive the cars himself.

Ford Motor Company’s Lincoln division delivered, in November 1939 and at a cost of $8,348.74, a current model K series chassis, to the Buffalo, New York, coachworks firm of Brunn & Company. There the four-door convertible, equipped with a 150-horsepower 414-cubic inch V-12, was further modified to meet U.S. Secret Service requirements. Brunn’s modifications added another $4,950 to the limo’s total cost.

The car was built with forward-facing jump seats, wider opening rear doors, reinforced extra-depth running boards and a pair of step plates above the rear bumper. It had strategically-placed handles for the Secret Service agents, as well as a Federal Electric Company police red light and siren combination with dual driving lamps and flag staff holders on the front. Another feature was that the roof was made extra tall so that the President, who had limited mobility and used a wheelchair, could enter and exit the car without difficulty.

Although coachbuilder Herman A. Brunn, owner of Brunn & Company, thought the car looked terrible with that extra tall top, the limo was finished and sent to Washington as ordered. In the end, it seems Mr. Brunn was right. According to Ford Motor Company internal memoranda and telegram communications, the car was returned to Brunn & Company’s Buffalo plant in the summer of 1941 to have its top replaced with one of standard height. Global events forced even more significant changes to the limo that December.

President Roosevelt preferred open cars whenever the weather permitted – and sometimes when it didn’t. (THF208655)

The First Presidential Car to Acquire Its Own Personality
Within a few weeks after the December 7, 1941, attack on Pearl Harbor, the White House Garage delivered the 1939 Lincoln K series limousine to Ford Motor Company’s plant in Alexandria, Virginia, on the waterfront across the Potomac River from Washington D.C. The car was shipped to the Lincoln plant on West Warren Avenue in Detroit and, upon its arrival, Lincoln workers began to disassemble the limousine, readying its wartime armor and additional modifications requested by the Secret Service.

Workers removed the Brunn body and altered the car’s chassis. Its suspension was beefed up with heavy-duty shock absorbers and additional leaves in the springs – to handle the added weight of armor plating and thick bullet-resistant glass. Likewise, a modified windshield frame was installed to accommodate the thicker windshield glass. When the Brunn body was reinstalled, it received a new 1942 model H series Lincoln front end clip (fenders, grill, and front nose cap piece), which gave the car a crisp, more modern look.

A more powerful generator was installed, with new wiring harnesses. Cooling was improved by making the radiator tank top an inch thicker, adding three-and-one-half inches more to the core than was standard, and a larger fan was put in for additional engine cooling capacity. The cowling also had wider side vents installed to let more of the engine’s heat escape.

The whitewall bias-ply tires were replaced with the first generation of what are now referred to as “run flat tires,” which enabled the big limousine to continue to travel a short distance to safety if the tires were shot out. The two spare tires were put into reworked special front fender wells, in painted metal tire covers that didn’t need to be bolted into place and allowed for rapid tire changes.

Other body modifications included one-and-one-eighth inch thick nine-ply glass; a special rear-mounted antenna for radio equipment; and steel plating in the doors, firewall, kick and quarter panels, floor, transmission hump, and gas tank. The doors received three-sixteenths inch steel armor plating. Including the weight of the armor and the bullet-resistant glass, each modified door weighed almost 200 pounds. Stronger latches and striker plates were installed to handle the heavier door weight.

A bullet-resistant divider was installed between the front and rear seats. It included fold out bullet-resistant side glass screens for use when the convertible top was down. Another bullet-resistant screen could be added behind the rear seat when the top was lowered, and then stored in the trunk when not in use. When the door windows were down, a spring-loaded flap covered the slot in the top of the door to stop things from falling inside and jamming the windows.

When the Lincoln originally was delivered in 1940, it was painted a dark midnight blue with russet trim. Now the car was repainted in black, with chrome trim and brightwork. The rear step plates, grab handles, and wider running boards were reinstalled after the repainting was finished.

Detroit plant workers also added new running/fog lights to the front bumper, along with flag staff holders. The Federal Electric Company police red light and siren were reinstalled on the left front fender. By the end of the second week of April 1942, the car was ready to ship back to the Alexandria plant for delivery to the White House Garage where it could resume its presidential duties.

At an unknown time after the car’s 1942 retrofitting, an unidentified member of the White House Press Corps gave the limo the sobriquet it retains today: “Sunshine Special.” Although the exact reason for the nickname is lost to history, it may have been due to FDR’s well-known love of riding with the top down – sometimes even when the weather recommended against it.


President Harry S. Truman aboard “Sunshine Special” near the end of the car’s service life, circa 1949. (THF208667)

Sunset for “Sunshine Special”
Following FDR’s death on April 12, 1945, “Sunshine Special” served his successor, Harry S. Truman, for another five years. The White House put out bids for a new presidential limousine in the spring of 1949 and, that summer, officials met with representatives from Ford Motor Company to discuss the contract. This would be the largest single order ever placed for the White House fleet.

In the early summer of 1950, nine custom-built enclosed 1950 model Lincoln Cosmopolitan limousines, produced by the Henney Motor Company of Freeport, Illinois, were delivered to the White House Garage. A matching four-door Lincoln Cosmopolitan convertible-bodied limousine, modified at the Grand Rapids, Michigan, shop of master coachbuilder Raymond Dietrich, was also delivered. The Dietrich seven-passenger Lincoln was fitted with a Hydramatic automatic transmission purchased from General Motors and then modified to mate with the 337 cubic-inch V-8 engine. Per the order’s specifications, none of the limousines were armored.

Upon delivery of the fleet of Lincoln Cosmopolitan limousines, older White House Garage vehicles were shipped back to their manufacturers or sold off. “Sunshine Special” was returned to Lincoln and subsequently donated to The Henry Ford.

Adapted from The Sunshine Special: FDR’s 1939 Lincoln K Series Presidential Limousine by Brody Levesque. The complete book is available at the Benson Ford Research Center.

Matt Anderson is Curator of Transportation at The Henry Ford.

Additional Readings:

• 1939 Lincoln Presidential Limousine Used by Franklin D. Roosevelt
  
• Innovation Icon: Kennedy Presidential Limousine
  
• Protecting Our Presidents
  
• 1912 Baker Electric Victoria: Transportation for Five First Ladies

Washington DC, 20th century, 1940s, 1930s, presidents, presidential vehicles, limousines, Henry Ford Museum, Ford Motor Company, cars, by Matt Anderson, books

Tracy K. Smith is the current Poet Laureate Consultant in Poetry to the Library of Congress, commonly known as the US Poet Laureate. She is only the fourth African American to hold this post (or its predecessor, the Consultant in Poetry to the Library of Congress) since its establishment in 1937, following Robert Hayden (1976–78), Gwendolyn Brooks (1985–86), and Rita Dove (1993–95 and 1999–2000).

Smith’s term as Poet Laureate comes at a particularly auspicious time, as the current Librarian of Congress, Carla Hayden (2016– ), is both the first woman and the first African American ever to hold that post—and she was nominated to her office by the first African American president, Barack Obama.


Barack Obama 2009 Inauguration Program, Enclosed with Inauguration Invitation

All of these offices had previously been held primarily or solely by white men, and with the new officeholders have come new perspectives. In Smith’s case, this began with her Poet-Laureate project, American Conversations: Celebrating Poems in Rural Communities, an outreach effort where she envisioned “poems might be a way of leaping past small-talk and collapsing the distance between strangers.” It continues in her latest book of poetry, Wade in the Water (Graywolf Press, 2018).

A book of poetry might seem at first glance to be a strange way to bring the past forward, tying historical events to topics at the forefront of our national conversation today. As Smith notes in the introduction to American Journal: Fifty Poems for Our Time, an anthology of poetry she edited, the very nature of a poem – from the layout of words on a page to the vivid, emotion-inducing language used – can “call our attention to moments when the ordinary nature of experience changes—when the things we think we know flare into brighter colors, starker contrasts, strange and intoxicating possibilities.” Poetry can help us process and make sense of complicated issues, and allow us the empathy to see things from someone else’s perspective.

In Wade in the Water, Smith takes this cultural and historical perspective one step further, with poems that use historical documents, including letters from slaveholders and statements of African Americans enlisted in the Civil War, to shed light on today.  Some of these are “erasure” poems, where Smith relies solely on text from these documents—but removes portions to induce a new perspective for the reader.  “Declaration,” for example, removes words from the Declaration of Independence:

Our repeated
Petitions have been answered only by repeated injury.
We have reminded them of the circumstances of our emigration
and settlement here.
--taken Captive
on the high Seas
to bear—

The words she chooses to include are reminiscent of the forced journey of slaves to America and highlight the day-to-day experiences of African Americans as in contrast to the high ideals of the original document.

Engraved Copy of the 1776 Declaration of Independence, Commissioned by John Quincy Adams, Printed 1823.

In the lengthy poem, “I Will Tell You the Truth about This, I Will Tell You All About It,” Smith again shares the direct words of African Americans who enlisted to fight in the Civil War, as well as their families, “arranged in such a way as to highlight certain of the main factors affecting blacks during the Civil War….” Excerpts from the letters and documents use the original spelling of the writers (pointing out the literacy levels of African Americans at the time), and shed light on the ways the war impacted African American families—many of which concerns still sound familiar today. The initial section of the poem is drawn from a November 21, 1864, letter from Mrs. Jane Welcome to Abraham Lincoln:

Mr abarham lincon

I wont to knw sir if you please

whether I can have my son relest

from the arme       he is all the subport

I have now       his father is Dead

and his brother that wase all

the help I had      he has bean wonded

twise   he has not had nothing to send me yet

Wood Engraving, "First and Last Dress Review of 1st Regiment South Carolinian (Negro) Volunteers," 1862.

The poems that use only Smith’s own words also reference the past as a way to understand the present.  In “Refuge,” the narrator tries to create empathy within herself for an immigrant, a refugee, by seeing that person as her mother during the Montgomery Bus Boycott:

Until I can understand why you

Fled, why you are willing to bleed,

Why you deserve what I must be

Willing to cede, let me imagine

You are my mother in Montgomery,

Alabama, walking to campus

Rather than riding the bus. I know

What they call you, what they

Try to convince you you lack.

Rosa Parks Bus before Restoration, Destination Sign, March 2002.

Empathy is clearly a key theme running through both Smith’s Poet-Laureate project and her poetry. Asked what “the greatest challenge of our time” is in an August 24, 2018, interview with the Financial Times, Smith answered, “Love. Maybe a better word is compassion. In particular, we have to learn a new way of looking at the people we fear; people we have socially acceptable ways of dismissing or condemning for their own misery or misfortune.” She invites us to use our own American history as that new lens in order to better understand others, the world we live in today, and not least, ourselves.

Ellice Engdahl is Manager, Digital Collections and Content, at The Henry Ford.

Washington DC, 21st century, women's history, by Ellice Engdahl, books, African American history

Timber Scribe: A small tool, a timber scribe, helps inform us about resourcefulness and entrepreneurship.

The Oxford English Dictionary confirms use of the term “timber scribe” by 1858 as “a metal tool or pointed instrument for marking logs and casks.” Another tool, a “race-knife” (also spelled rase knife) performed a similar function, “marking timber,” but the tools differed in detail.

The race knife had a “bent-over, sharp lip for scribing,” according to Edward H. Knight who compiled the Practical Dictionary of Mechanics, a nearly 8,000-page behemoth containing 20,000 subjects and around 6,000 illustrations, published in 1877. The timber scribe included two pieces with bent-over sharp lips as well as a point. The combination made it possible to scribe Arabic numbers, not just gouge Roman numerals, into logs and casks and timber, as shown below.

This tool has a wooden handle, a brass band that helped stabilize the wooden end where the forged steel was inset into the wooden handle, and the steel point with a cutter/gouge and separate “bent-over sharp lip”/gouge Dimensions: Length 7.25 inches; Height 2 inches; Width 1 inch. Object ID: 2017.0.34.625

Simply stated, a timber scribe included the components of the race knife. Lumbermen, shipbuilders, house wrights and carpenters, coopers, and surveyors, all used the timber scribe to make uniform marks on wood, but they could also use the elongated cutter/gouge to make free-hand marks. They used the race knife to make free-hand marks.

Appearances mattered. The timber scribe at The Henry Ford combines three natural materials – iron/steel, brass, and wood – all processed and refined in ways that make the tool pleasing to the eye, and useful to the woodsman or craftsman. The maker chamfered the edges of the wooden handle and scribed the brass collar.

An 1897 catalog from a Detroit hardware distributor, the Charles A. Strelinger Company, advertised a “rase knife or timber scribe.” The company sold three variations: a large size (though the catalog provided no dimensions), a small size, and a pocket rase knife. The large timber scribe included all three steel components (point with cutter gouge and “bent-over sharp lip” gouge) while the small version included just two of the three (point and gouge). The pocket rase knife likely consisted of just the gouge, which folded into the wooden handle of the knife, as seen below.


Rase Knife or Timber Scribe. Detail from Wood Workers’ Tools: Being a Catalogue of Tools, Supplies, Machinery, and Similar Goods used by Carpenters, Builders, Cabinet Makers, Pattern Makers, Millwrights, Carvers, Ship Carpenters, Inventors, Draughtsmen, and [also] all “Wood Butchers” not included in Foregoing Classification and in Manufactories, Mills, Mines, etc., etc. Detroit Michigan: Charles A. Strelinger & Company, 1897, page 662. In the collection of the Benson Ford Research Center, The Henry Ford, Dearborn, Michigan. 

The tool in The Henry Ford's collection compares to the large timber scribe illustrated in Strelinger & Company’s 1897 catalog. The tool’s dimensions (7.25 inches long) inform us about the size of a “large” scribe.

Charles A. Strelinger was born in Detroit in 1856. The 1897 catalog Charles A. Strelinger Company indicated that the company had 30 years of experience in manufacturing and selling tools, supplies and machinery. Strelinger’s approach to advertising his wares through print media indicated how little change occurred in the tool business. The front page of the catalog had a blank space to write in the date, and, as he explained in “This Year’s Catalogue”: “our 1895 catalogue is also our 1896-’97-’98, and perhaps, 1899 catalogue. If we were selling Seeds and Plants, Ladies’ Hats and Bonnets, Patent Medicines, etc., we would, doubtless, find it necessary to issue a new catalogue every year, but our goods are of a stable nature, changes are comparatively few, and we are not warranted to going to the expense of printing a new book every year.”

The timber scribe and the Strelinger Company catalog confirm the need for specialized tools that serve many in various wood-working trades. The Company was resourceful in advertising, because the hand tools in woodworking were remarkably standardized by the late-nineteenth century and remained useful despite industrialization.

Debra A. Reid is Curator, Agriculture and the Environment at The Henry Ford.

The Henry Ford received funding from the Institute of Museum and Library Services (IMLS) in 2017 to support a three-year project to conserve, rehouse, and digitize thousands of objects. This is work, supported through IMLS’s Museums for America Collections Stewardship project, will continue over three years as The Henry Ford consolidates offsite collections into a new location on campus. The work “will improve the physical condition of the project artifacts through conservation treatment, rehousing, and removal to improved environments.” Finally, IMLS funding “will facilitate collections access through the creation of catalog records and digital images, available to all via THF's Digital Collections.”

A series of blogs shares the stories of small items that tell big stories of innovation, ingenuity, and resourcefulness, and that relate to other collections and interpretation at The Henry Ford.

entrepreneurship, IMLS grant, by Debra A. Reid

Have you ever wondered how we photograph quilts at The Henry Ford? While the answer is probably no, you might be surprised to find out that it is quite a process. Most quilts are quite large, ranging from 7ft x 4ft to even 9ft x 5ft. With that being said, our photo studio in the museum only has a ceiling that is 10ft tall, but to get an accurate picture of the quilt we would need the camera to be pointing at the quilt at a 90-degree angle. How do we accomplish that in a room that’s only 10 ft tall? We find higher ground!


Since our studio is on the back wall of the museum, we need to be somewhere elevated, but relatively nearby so we aren’t hauling our equipment all over the place. So, the Highland Park Engine is our answer. We mount the camera on the top railing of the stairs closest to the entrance to Conservation.

Then, with the help of 2-3 people, we lay the quilts on a large 10 x 10 wooden board that has a layer of muslin cloth on it (to protect the quilts and stop them from sliding down the board), We hoist the quilt board up onto stands to hold it in place at about a 60-degree angle which allows us to angle the camera to shoot straight at the quilt, giving us the correct perspective as if it were lying flat.

Here are a few examples of the finished images that go online on our Digital Collections website.





Looking at them, you wouldn’t think that they were photographed any other way than lying down, right? That’s the magic of photography - with a little bit of resourcefulness and ingenuity added in.

You can view all the quilts from our collection that we’ve photographed on our Digital Collections here.

Jillian Ferraiuolo is Digital Imaging Specialist at The Henry Ford.

Henry Ford Museum, quilts, photography, digitization, collections care, by Jillian Ferraiuolo, #Behind The Scenes @ The Henry Ford