Our new limited-engagement exhibit, Collecting Mobility: New Objects, New Stories, opening to the public October 23, 2021, takes you behind the scenes at The Henry Ford to show you how we continue to grow our vast collection of more than 26 million artifacts. One key question the exhibit asks is why we collect the items we collect. To get more insight on the artifacts on exhibit and future trends that may impact our collecting, we reached out to several of our partners. In this post from that series, our friends at the University of Michigan, donors of the Navya Autonom® driverless shuttle bus in the exhibit, tackle questions about autonomous vehicles.
The Mcity shuttle project was less about autonomous vehicle (AV) technology than it was about human psychology. Why is it important to understand our current attitudes and comfort levels with self-driving vehicles?
Self-driving vehicles promise a better world for all of us by making roads safer, reducing fuel use, and providing more equitable, more accessible mobility options to more people. None of those benefits can be realized, however, if the public does not trust fully automated vehicles or is afraid to ride in them.
When the Mcity Driverless Shuttle launched in June 2018, consumer trust in automated vehicles was declining in the wake of two fatal crashes involving partially automated vehicles in Arizona and California. Mcity wanted to better understand how consumer attitudes about self-driving vehicles might be affected if they were able to experience the technology first-hand.
Navya Autonom® Driverless Shuttle Bus, used on the University of Michigan's North Campus and Mcity Test Facility, 2017, now in the collections of The Henry Ford and on exhibit in Collecting Mobility in Henry Ford Museum of American Innovation until January 2, 2022. / THF188013
Mcity worked with global market research firm J.D. Power to survey shuttle riders and non-riders—bicyclists, pedestrians, drivers of other vehicles—about their experience. By the time Mcity’s research wrapped up in December 2019, consumer sentiment nationally remained weak, according to separate surveys published in early 2020 by AAA and J.D. Power. But Mcity Driverless Shuttle survey results showed that 86 percent of riders trusted the technology after riding in the shuttle, as did 67 percent of nonriders surveyed.
Understanding the role of public trust and acceptance is essential to widespread adoption of new mobility technologies.
Self-driving cars may be the most disruptive mobility technology since the car itself. They will affect every aspect of our century-long relationship with the automobile. What can we do to ease the transition?
We must help consumers better understand the potential of this disruptive technology to improve the quality of their day-to-day life, as well as society as a whole. One way to do that is through exhibits like Collecting Mobility at The Henry Ford.
What we did not have at the dawn of the automotive age a century ago was the myriad ways to communicate that are at our fingertips today. On-demand multimedia content produced and shared by industry, government, academia, media, and other organizations teaches the public about self-driving technologies and their risks and benefits as they evolve, helping to smooth the transition to a new way of moving people and goods.
Identification badge worn by Gerry Gomes while on assignment at Ground Zero in September 2001. / THF185942
This year marks the 20th anniversary of events that have changed the course of American history: the terrorist attacks of September 11, 2001, commonly known as “9/11.” In their online FAQs, the 9/11 Memorial & Museum explains briefly what happened that day:
“9/11” is shorthand for four coordinated terrorist attacks carried out by al-Qaeda, an Islamist extremist group, that occurred on the morning of September 11, 2001.
Nineteen terrorists from al-Qaeda hijacked four commercial airplanes, deliberately crashing two of the planes into the upper floors of the North and South Towers of the World Trade Center complex and a third plane into the Pentagon in Arlington, Virginia. The Twin Towers ultimately collapsed because of the damage sustained from the impacts and the resulting fires. After learning about the other attacks, passengers on the fourth hijacked plane, Flight 93, fought back, and the plane was crashed into an empty field in western Pennsylvania about 20 minutes by air from Washington, D.C.
The attacks killed 2,977 people from 93 nations: 2,753 people were killed in New York; 184 people were killed at the Pentagon; and 40 people were killed on Flight 93.
The attacks shocked, saddened, scared, and angered Americans. In their aftermath, the United States instituted new air safety regulations; embarked on the longest-running war in our history, in Afghanistan (from which we just exited last month); and created a new federal department, the Department of Homeland Security. It’s safe to say that most Americans who were adults in 2001 remember where they were and what they were doing when they first learned of the attacks, and most Americans have felt their effects in some way.
The front page of the September 12, 2001, issue of the Detroit Free Press referred to the terrorist attacks of the previous day as “America’s Darkest Day.” / THF625308
One person this is particularly true of is Gerald “Gerry” Gomes, one of The Henry Ford’s dedicated volunteers. Gerry donated a number of the artifacts seen in this post, related to his work responding to 9/11.
Around 1990, Gerry became involved with the National Disaster Medical System (NDMS), which, NDMS explains, is “a federally coordinated health care system and partnership of the Departments of Health and Human Services, Homeland Security, Defense, and Veterans Affairs.” Its mission is “to supplement our nation’s public health and medical resources…. NDMS mobilizes resources through specialized teams that provide human and veterinary healthcare, mortuary assistance, patient movement coordination, and definitive care during times of need.” Those affiliated with NDMS have regular jobs and lives, but must be packed and ready to deploy at a moment’s notice when they are called up to duty. In more than 20 years of NDMS service, Gerry assisted with many disasters (such as devastating Florida hurricanes) and key events (such as presidential inaugurations and Olympics games) at both the state and federal levels.
Within NDMS, Gerry worked on a Disaster Medical Assistance Team, or DMAT. The DMATs are made up of doctors, nurses, EMTs, firemen, paramedics, and other staff who support them. Their role is to provide medical care during public health emergencies and “National Security Special Events,” which might include presidential inaugurations, visits by significant international dignitaries, or international conferences and important gatherings. When deployed, Gerry’s team could process up to 200 casualties per hour. His role on the team was in communications—keeping the team in contact with command. He was given the role as they needed someone who had field experience and could interact effectively with people at the scene of an emergency.
"National Disaster Medical System" patch worn by Gerry Gomes while on assignment at Ground Zero in September 2001. / THF185941
Gerry’s day-to-day job was in communications at Ford Motor Company. On September 11, 2001, his boss called and told him that planes had hit the Twin Towers of the World Trade Center, and that he thought Gerry would be activated by the NDMS. And indeed he was. It wasn’t long before Gerry was boarding an airplane at Detroit Metro airport, with military planes and helicopters flying overhead. Despite an order issued by the Federal Aviation Administration less than an hour after the first plane hit the World Trade Center that required all civilian flights then in the air to land and barred any further departures, Gerry’s flight departed under the auspices of the federal government, escorted by multiple other planes all the way to New York’s LaGuardia airport.
In the first of three missions there, Gerry’s DMAT team was deployed to the World Trade Center site, known as Ground Zero—or, to the responders who worked there after the towers collapsed, “The Pile.” Their initial mission objective was to serve as a casualty response team, triaging survivors, so they set up three field hospitals near the remains of the World Trade Center Marriott Hotel, between the Twin Towers. However, it quickly became clear that there were few survivors. The team then pivoted to providing medical care for the other responders “working The Pile.” Gerry said many of those they treated would have their shoes burned off, as the smoldering remains of the towers were still so hot.
After the September 11 attacks, many individuals, organizations, and corporations were eager to provide assistance in whatever way they could to responders at Ground Zero. Because many of the New York-New Jersey Port Authority’s vehicles were destroyed during 9/11, Ford Motor Company loaned them 15 pre-production prototypes—including this one—of the Ranger FX4, a heavy-duty, 4-wheel drive truck with special off-road equipment. / THF1368
The team’s first mission lasted two weeks. After that, they had a four-week mission recovering the remains of victims. Their third and final mission was to close down the site and make sure all the equipment was retrieved.
The work was mentally taxing. Every day, everyone who was working at The Pile had to undergo a psychological evaluation. Gerry’s team was also scheduled to work overnights—from midnight to noon—which added an additional strain. Gerry told the story of bonding with a firefighter as fellow “coffeehounds,” sharing a mutual love of coffee. Gerry later found out that firefighter had previously been stationed near Ground Zero, and that many of those he had been stationed with had been killed in the attack. The firefighter had not talked since that time—but he would talk to Gerry. He later told Gerry he had begun to realize it was not his fault he was not killed along with his colleagues that day.
When asked how he dealt with the constant emotional toll, Gerry responded, “You learn to close out the ambient. You’re there functioning in your job the best you can.” The team is not just one person, Gerry emphasized, but instead everyone working together. “That’s how we achieve more,” he added. His DMAT was made up of “A-type personalities, people at the top of their field with nothing to prove,” who worked together to get the job done despite the challenges. In fact, the team’s motto was “Semper Gumby,” indicating they were always flexible and would do what it takes.
As Gerry and so many others worked at Ground Zero, communities across the United States found ways to mourn and come together. These photographs are from the “Peace and Unity Candlelight Vigil” held in front of Henry Ford Museum on September 19, 2001. / Digital Collections
There was also worry from the families of the responders at The Pile—Gerry and his team felt very safe there, but Gerry noted that “families don’t know that.” Gerry’s son, in the U.S. Navy, would call, along with his commanding officer, to try to get information on what was going on—but Gerry was not allowed to speak about his work at the time. He could not even tell anyone where he was staying—but now can say that the team stayed at the Waldorf Astoria New York.
Though Gerry worked on a series of challenging and complicated projects for the NDMS over decades, he noted that the World Trade Center was “the most terrible time.” He also added that such work is “a thankless job and sometimes the people in the group thank you”—as Gerry’s team was honored by the Michigan Senate when they returned.
Gerry’s team at Ground Zero, pictured with the remains of the Marriott behind them. Gerry is wearing the yellow rain jacket—the “yellow canary,” as he put it. / THF625013
Gerry also received thanks from an unexpected source during his Ground Zero deployment. On a coffeebreak in the “Green Tarp Inn,” the tent where meals were provided for the responders at the site, he met a young woman who was volunteering to feed staff. She asked if she could sit with the group, told them she was Canadian, and asked them questions about their assignment. Each day, she would join them for coffee. Gerry added: “The only problem was I did not know that she was a singer/songwriter. The last day of my assignment, Alanis gave us a hug and thanked us for just sitting there and talking with her. She asked if she could sign our hats. When I got home, one of my daughters saw the signature of Alanis Morrisette on the hard hat and asked, ‘Did you meet her?’ I said, ‘Yes, we had coffee together every morning.’ Well, my daughter began to educate me on her.”
Two views of the hard hat that Gerry Gomes wore during his deployment at Ground Zero. Beyond Alanis Morrisette’s signature, you can see decals on the hat. “Semper Gumby” was the team’s motto, indicating their flexibility to do what it takes to get the job done. The American flag includes the phrase “United We Stand,” the motto of workers at Ground Zero. The “I Love New York” decal was “our way to support the people not at Ground Zero,” while police and firefighter stickers were a “thank you” from officers stationed at Ground Zero that Gerry’s team supported. / THF188516, THF188517
Gerry is now retired both from Ford Motor Company and from the NDMS, but we are lucky to have had him as a volunteer at The Henry Ford since 2018, helping out first at Edison Illuminating Company’s Station A in Greenfield Village and the model trains in Henry Ford Museum of American Innovation, and later with our major car shows, Motor Muster and Old Car Festival. We are grateful for his volunteer work for us—as well as for his work at Ground Zero, on behalf of all Americans, 20 years ago.
Operating the Marionettes in Writer’s Cramp: A Review in Little Marionette Show at the A.B. Dick Company Exhibit at the New York World’s Fair, 1939 / THF623950
The A.B. Dick Company, a major copy machine and office supply manufacturer, wanted to draw a crowd to its 1939 New York World’s Fair exhibition. The company decided that a musical marionette show, Writer’s Cramp: A Review in Little, was just the ticket. A.B. Dick selected Tatterman Marionettes, a high-quality touring company managed by Edward H. Mabley (1906–1986) and William Duncan (1902–1978). Mabley wrote the musical comedy and Duncan produced the show, staged at the entrance to the A.B. Dick display in the Business Systems and Insurance Building.
A.B. Dick Company Mimeograph Exhibit and Writer’s Cramp Marionette Show at the New York World’s Fair, 1939 / THF623944
Writer’s Cramp featured changes in communication technology from “the days of the cave man” to the efficient modern office mimeograph machine. Marionettes represented Miss Jones, the secretary, and Mr. Whalen, the executive, trying to rush distribution of important correspondence. Father Time helped inform Mr. Whalen of his good fortune at present (1939) by escorting him through millennia of changes, starting with Stone Age stenographers, and including tombstone cutting, monks with their quill pens, and typists with their typewriters. The play culminated with the unveiling of A.B. Dick Company’s Model 100 Mimeograph, “the World’s Fairest writing machine!”
Writer’s Cramp: A Review in Little Marionette Show at the A.B. Dick Company Exhibit at the New York World’s Fair, 1939 / THF623948
Mabley and Duncan organized Tatterman Marionettes in Detroit, Michigan, in 1922, and had relocated to Cleveland, Ohio, by 1930. They established a reputation through high-quality performances to a range of audiences.
Panel 4 of promotional material, “A Modern Adult Program and a New Children’s Program for the Tatterman Marionettes,” 1931-1932 / THF623902
Edsel B. Ford contracted with the company to perform for children in his home during March 1931. At that time, the always entrepreneurial Mabley recommended his and Duncan’s product, Master Marionettes, as “unusual gift favors” for the children attending that show.
Master Marionettes: Professional Puppets for Amateur Puppeteers, 1930-1940 / THF623904
Tatterman Marionettes’ reputation grew through work with the Century of Progress exposition in Chicago in 1934, where the company presented 1,300 plays. More World’s Fair performances followed. A.B. Dick Company and General Electric both contracted with Tatterman to produce marionette performances during the 1939 World’s Fair. General Electric’s Mrs. Cinderella promoted electrification as part of the modernization of Cinderella’s drafty old castle. (Libby, McNeill & Libby also featured marionette performances, and other corporations staged puppet shows.)
The A.B. Dick Company spared no expense to ensure a first-class production. Tatterman provided the marionettes and experienced operators, while industrial designer Walter Dorwin Teague (1883–1960) prepared blueprints for a detailed stage set. Teague’s exhibit work for A.B. Dick and several corporations during the 1939 World’s Fair helped solidify his reputation as “Dean of Industrial Design.” The company invested in a conductor’s score by Tom Bennett (1906–1970), who would go on to join NBC Radio as staff arranger and musical director after the World’s Fair.
With the script finalized (February 27, 1939), experienced operators put the marionettes to work. After the World’s Fair opened on April 30, 1939, they delivered programs on a set schedule published in official daily programs. On Sunday, October 22, 1939, for example, Tatterman Marionettes performed 15 shows—at 10:20, 11:00, and 11:40 in the morning; at 12:20, 1:00, 1:40, 2:20, 3:00, 3:40 in the afternoon; and at 5:40, 6:20, 7:00, 7:20, 8:00, and 8:20 in the evening.
“Brighten Up Your Days,” Song for the Writer’s Cramp Marionette Show, New York World’s Fair, 1939 / THF623906
At the end of each Writer’s Cramp performance, A.B. Dick mass-produced the feature tune using a mimeograph machine and photochemical stencil. Attendants distributed this sheet music, calling attention to the modern conveniences: “Just a moment, PLEASE! The young lady right behind you is running off some of the words and music from our show—they’re for you to take home with our compliments. Don’t go away without your copy!”
The Tatterman marionettes from Writer’s Cramp featured prominently in World’s Fair promotional material intended to draw the attention of office outfitters to the Business Systems and Insurance Building. Their little stage set conveyed big lessons to the hundreds of thousands of professionals who flowed through the A.B. Dick exhibit at the New York World’s Fair.
Debra A. Reid is Curator of Agriculture and the Environment at The Henry Ford. Thanks to Saige Jedele, Associate Curator, Digital Content, for editorial guidance.
The Henry Ford acquires a poster portfolio as a way to document one of the largest protest movements in U.S. history
About half of the Signal-Return solidarity posters acquired by The Henry Ford.
“Justice Can’t Wait,” “Make Good Trouble,” “No Justice No Peace.” These are just a few of the messages that appear in a collection of letterpress posters recently acquired from Signal-Return printshop by The Henry Ford. In the history of well-designed posters, brevity of words and a strong visual impact work together to communicate messages at a glance. Boldly capitalized, imprinted in flat black ink on brown or white chipboard by the embossing strike of a printing press—these posters are meant to generate a feeling of urgency.
In early June 2020, Detroit’s nonprofit letterpress organization Signal-Return responded to the civil unrest sparked by the deaths of George Floyd, Breonna Taylor, Ahmaud Arbery, and others by producing free protest posters. The project was undertaken in solidarity with the principles behind the Black Lives Matter movement, with the intent that the posters would be carried by supporters in protests.
The remainder of the Signal-Return solidarity posters acquired by The Henry Ford.
Using social media to spread the word about their project, Signal-Return offered to create small batches of custom posters for the metro Detroit community, free of charge. As stated in their announcement, “The printing press has been, since its invention, a powerful tool of protest and an agent of change. Let us provide posters to aid in this effort.” Each recipient was asked to submit a concise five-word message through an online form. A few days later, the posters were ready for pickup “social distance style” across the roped-off front entry of the printshop. Many of these posters were visible throughout Detroit in the summer of 2020 at protests and taped to store windows, streetlight poles and freeway overpasses.
Signal-Return Letterpress Shop, Detroit, Michigan, June 2020 / THF610910
By September 2020, Signal-Return’s director, Lynne Avadenka, counted a total of 168 individual requests. Some requests repeated popular protest language of the day, while others were entirely unique and personal. Thanks to Signal-Return’s donation, The Henry Ford has acquired a portfolio of 44 examples as a way to document one of the largest protest movements in the history of the United States. The method by which they were acquired—called “rapid response collecting” by museum professionals—allows museums to collect stories of current events and major moments in history as they unfold.
Kristen Gallerneaux is Curator of Communications and Information Technology at The Henry Ford. This story was originally published in the January–May 2021 issue of The Henry Ford Magazine, available on Issuu.
Pocket Radio, circa 1925, manufactured by the Auto Indicator Company of Grand Rapids. / THF156309
Today, the portability of audio entertainment has become second nature to most people around the world. With relative ease, a person can put in/on a pair of headphones, wirelessly connect to a handheld device of their choosing and pick from a wide variety of options, including music, podcasts, audio books, etc. While we have become accustomed to this comfort and convenience today, in the early 1920s, “portable” and “wireless” tech, like the battery-powered “Pocket Radio” manufactured by the Auto Indicator Company of Grand Rapids, Michigan, was considered cutting edge in the audio entertainment industry.
The roots of the portable nature of the Pocket Radio can be traced back to Thomas Edison’s 1877 unveiling of his phonograph. The machine, which was the first to practically demonstrate that sound could be recorded and reproduced, proved that an audience didn’t have to be physically present in order to enjoy a listening experience. By the 1910s, subsequent improvements of the phonograph by other inventors and companies had brought a booming audio entertainment industry to the masses.
Thomas Edison, Charles Batchelor and Uriah Painter with Edison's Phonograph, April 18, 1878. / THF111744
Consumers grew used to the idea that the sounds they enjoyed could be listened to on their own time and in their own space – all with the help of their own personal phonograph. When World War I broke out, portable versions of phonographs found their way to the front lines not only for military use in the training of recruits, but also to entertain troops. The much-needed musical reprieve provided through a phonograph boosted morale by helping soldiers, individually or in groups, briefly escape the terror happening around them.
Edison Diamond Disc Phonograph, 1919. In the years just after World War I, Americans loved listening to music on their phonographs. Thomas Edison's Diamond Disc Phonograph Company was at its peak of production. / THF63458
Wartime also provided an opportunity to explore another cutting-edge technology that had gained traction before the war – wireless communication in the form of radio waves. During World War I, the U.S. government took over the fledgling radio industry and instituted a ban on civilian use of radio in order to further their wartime experimentation. After the war, the ban was lifted in 1919, and by mid-1922 a “radio craze” was sweeping the nation, as Americans became infatuated with the new technology. Around the country, broadcasting stations began to spring up to serve the thousands of listeners seeking to tune in to hear music, news and more.
Behind the Scenes of a Radio Drama, 1923 / THF120581
In 1924, partners in the Auto Indicator Company of Grand Rapids sought entry into this market with their Pocket Radio. As one of the first companies to patent and manufacture signal lights for automobiles, their demonstrated business savvy showed they understood that the increasing affordability of the automobile and a booming post-war economy meant more consumers on the go – and these consumers wanted to take their audio entertainment with them.
Like many Americans during the 1920s, these two couples, their children, and a family dog, answered the call of the open road. The families have set up in an open field while auto touring. / THF105461
By today’s standards, the four pound (12 x 3 x 3 inches) “Pocket Radio” would not be considered “pocket-sized.” But in 1924, the summer tourist or picnicker that bought this radio for $23.50 would have understood that “pocket” referred to the pocket door of an automobile, where the radio could be stored. Without having to worry about bringing physical records to play on a portable phonograph or lugging around an early battery-powered table-top sized radio, a Pocket Radio owner could tune in to any broadcast station within five miles, and, with the addition of an aerial or ground receiver, could listen to a broadcast station that was 1,000 miles away.
Operadio 2 Portable Broadcast Receiver, 1923-1927. The Operadio 2 was among the first generation of commercial portable radios. While a "mobile" device weighing 30 pounds may be laughable to us now, the Operadio was a groundbreaking device. / THF160275
A seemingly smart product, the Pocket Radio didn’t bring the business partners of the Auto Indicator Company much success. By the mid-1920s, they had given up on the radio and molded their former business into the Multi-Selecto Phonograph Company, an unwise decision in a turbulent time. Throughout the 1920s, while the phonograph remained a viable product, the industry underwent significant strain with the changes brought on by the advent of the “Golden Age of Radio.” While companies tried to stay afloat by selling hybridized products that combined the radio and the phonograph, like many other phonograph companies of the time, the Multi-Selecto Phonograph Company wouldn’t make it out of the Great Depression.
Victor Electrola, 1927. By the late 1920s, radio tuners, phonographs, amplifiers, and loudspeakers began to condense into one unit. Manufacturers housed this technology within attractive wooden consoles, accepted as furniture within consumer's living rooms. / THF159418
Today, the Pocket Radio serves as documentation of an exciting time in the history of technology, where new ideas met at a crossroads to provide the consumer with more personal freedom in how and where they enjoyed their entertainment choices.
Ryan Jelso is Associate Curator, Digital Content, at The Henry Ford.
A crowd gathers outside the news office of the San Francisco Examiner to await the outcome of the 1920 presidential election. Reporters used loudspeakers to announce the results to the throng of voters and spectators. / THF610502
On Election Day, November 2, 1920, Americans waited anxiously for news of who would be the next President of the United States. In the evening, many voters milled around newspaper and government offices waiting to hear from election officials and reporters the latest results that were streaming across telephone and telegraph wires; others waited to read about the outcome in the next day's newspaper. But in 1920, a growing number of Americans could stay at home and listen to election returns announced over the expanding wireless media -- radio. During the next decades, radio would become an essential link in the political life of Americans -- not only for Election Day results, but for news of campaigns, conventions, and inaugurations; reports on the life of the President; and for the calm reassurance of leadership articulated in fireside chats.
Pittsburgh, Pennsylvania, radio station KDKA broadcast the election returns in between musical interludes to hundreds of listeners on Election Day. The station was the first federally licensed commercial radio station in America. This photograph shows the studio in 1920. / THF120670
Andy Stupperich is Associate Curator, Digital Content, at The Henry Ford.
In the early 1930s, tensions were running high between two competing news sources: newspaper publishers were feeling the strength of their monopoly slipping away as the public’s appreciation for radio news broadcasts grew. This time of conflict in communications history is known as “The Press-Radio War.”
Publishers felt especially threatened by the nimbleness of radio networks. Broadcasters could share breaking news immediately over the airwaves, rather than having to wait for the next day’s run of newspapers to be printed and distributed. At first, newspaper companies tried to boycott radio’s ability to grow into something more than just an entertainment medium by asking wire services to block the flow of newsworthy information to radio stations. But eventually, the two media formats settled into a truce by the late 1930s, partly owing to the demand for reliable information-sharing as the threat of World War II grew.
The Detroit News “autogiro” aircraft flies over the WWJ transmitter towers on the roof of the Detroit News building. The autogiro used a swiveling camera to take aerial photos of newsworthy events and quickly transported reporters to the sites of developing stories. /THF238502
Some newspapers saw the financial benefit in blending formats and went so far as to cut out the competition by starting their own radio news stations. The Detroit News was one of the first newspapers in the United States to incorporate a commercial radio station into its operations. In August 1920, WWJ (then owned by the Detroit News) launched its program of nightly broadcasts under the call sign 8MK. As of 2020, WWJ has been on-air for 100 years!
In this image, the Detroit News autogiro flies over downtown Detroit. The Penobscot Building—site for the News’s experimental W8XWJ station—appears in the foreground. The original vertical “whip” antenna is just visible on the ball that tops the metal tower. /THF239963
In 1936, the Detroit News launched experimental audio broadcasting station W8XWJ from the 47th floor of the Penobscot Building in downtown Detroit. W8XWJ was formed under the FCC’s ultra-high short-wave “Apex” station program, an experiment designed to provide listeners with higher quality AM signals. The station’s original 100-watt AM vertical “whip” antenna was attached to the beacon sphere that tops the metal tower perched on the roof of the Penobscot Building. The height of the Penobscot—the tallest skyscraper in the city at that point—helped to disperse the radio waves over the entire city. Many people are familiar with the glowing red beacon at the top of the Penobscot, but its connection to the growth of radio in the city is not as well known.
From 1938-1940, W8XWJ ran a fascinating but ultimately short-lived experiment with an emerging technology called “radio facsimile.” Customers would hook a special “radio printer” up to their own radio, which would print the news overnight while they slept. In the morning, the news would be ready to enjoy with morning coffee – no need to deliver a physical newspaper!
One of the original Finch Facsimile Transmitters from W8XWJ, complete with original station badge visible and a sample of a radio fax. /THF160295
At W8XWJ, a Finch Facsimile Transmitter was used to convert images and text into audio tones. These signals would arrive in customer’s home via radio waves, where their “radio printer” would translate the tones into human language. Everything would print out onto continuous rolls of thermal paper.
This is a Crosley Reado Radio Printer – the type of device that people would connect to their home radio and would receive their faxed newspapers on. When The Henry Ford conserved this artifact through an Institute for Museum and Library Services grant, our conservators were excited to find an example of a facsimile still on the drum inside the machine. In this image, you can see an original radio facsimile portrait of Boris Karloff, who was famous for his 1931 portrayal of Frankenstein’s monster.
The Henry Ford’s collections also include the original transmitter and amplifier that powered the W8XWJ station.
W8XWJ’s Western Electric 500 Watt Ultra Shortwave Transmitter and Amplifier. These two devices are visible in their original installation here. /THF173159, THF173165
The idea behind W8XWJ’s radio facsimile experiment was revolutionary, but the process was slow and fussy. It could take over 20 minutes to print a single page of news, and signal reception became unreliable beyond a mile or two away from the transmitter. In 1940, W8XWJ ended its radio facsimile project.
While the original “whip” antenna for W8XWJ was replaced by a FM antenna in the early 1940s, if you look toward the top of the Penobscot building today, there is a tangle of communication equipment visible from street level. And in the interesting way that the new and the old can merge and converge within the histories of technology, some of this contemporary equipment fulfills radio facsimile’s promise to provide easily accessible information—the top of the Penobscot now serves as an important hub for Detroit’s wireless Internet network.
Kristen Gallerneaux is Curator of Communications & Information Technology at The Henry Ford.
We hope you enjoyed this week’s experiences focused on Information & Communication Technology. Were you inspired to create or invent something? Please share your photos with us on social media using #WeAreInnovationNation!
If you missed anything from our series this past week, check out the recordings and resources below. We hope that you will join us this upcoming week to explore Power & Energy.
What We Covered This Week Information & Communication Technology: How can a problem be inspiration for finding a better way of doing things? STEAM Stories Join us for a reading of What Do You Do with an Problem? by Kobi Yamada and then learn about plastic and metal using a lesson from our early childhood curriculum, Innovate for Tots.Watch the video here.
Innovation Journeys Live! Join us for an Innovation Journey Live when Diana Nucera shares how her organization, the Detroit Community Technology Project, is helping kids connect to their virtual learning experiences. Watch the video here.
Kid Inventor Profile Alex Knoll, 15-year-old student from Idaho developed Ability App, a global app that will help people with disabilities and caregivers search for specific disability-friendly features at locations around the world. Explore these Invention Convention Curriculum activities to keep your child innovating. Watch the interview here.
Resource Highlight: Innovate for Tots In our continued efforts to help parents, students and educators during these times of uncertainty, The Henry Ford is providing helpful tips that assist parents in adapting its educational tools for implementation at home.
This week we are highlighting, Innovate for Tots. These interdisciplinary, hands-on activities are designed for curious preschoolers, and focus on themed materials that are experienced through storytelling, project-based learning, science, discovery, artifact viewing and home/neighborhood exploration.
Our goal is to provide standards-based learning opportunities introducing our littlest learners to the habits and actions of innovators and the language of innovation through our stories from history. Each lesson includes fine and gross motor skills, science, social studies, literacy and the arts to accomplish this goal. We explore materials used in artifacts from the vast collections of The Henry Ford, as well as our own homes. Our innovating tots will develop their understanding of materials and the ways we have used them, hopefully inspiring their desire to Stay Curious, Collaborate, Empathize, Uncover and Design the artifacts of the future.
The lessons are designed to provide tremendous flexibility. The various components can be completed indoors or out. We have designed them into series of five activities, divided into Science, Technology, Engineering, Art and Math (STEAM), English, Language Arts and Literature (ELA/LIT), Social Studies and History (SS/HST), focused on one material or one combination of materials. Each includes the related artifacts from the collections at The Henry Ford Museum of American Innovation which can be shown digitally as well as instructions, pictures, or links for projects. Additionally, A Family Connection provides the family an opportunity to participate in the learning and a coloring sheet are also attached to each material.
Each Innovate for Tots Lesson Plans for Toddler/Preschool teaches the following age-appropriate parts of our Model I – the Habits and Actions of Innovators:
Model I: Help your tots practice the Habits of Innovators: -Stay Curious: Ask questions like what, why, how -Collaborate: Talk about helping, work together -Learn from Failure: Talk about “trying again," what's another way to... -Empathize: How did the characters in the stories feel? How might it make others feel
Help your tots practice the Actions of Innovators: -Design: Make, build, and create -Uncover: What do you see? (characteristic/properties); What problems does this material help us solve?
Parents and educators can learn more about Model I here.
An image from the set of The Henry Ford’s Innovation Nation.
For many people—especially those who grew up between the decades of the 1970s through the 1990s—the sight of a boombox often prompts the thought: “I wonder how heavy that thing would feel, if I carried it around on my shoulder?” Boomboxes are infused with the promise of human interaction, ready for active use—to be slung from arm to arm, hoisted up on a shoulder, or planted with purpose on a park bench or an empty slice of asphalt in a city somewhere.
Here at The Henry Ford, we recently acquired a trio of classic boomboxes to document stories about the growth of mobile media and the social communication of music in American culture.
The Norelco 22RL962 was developed in the mid-1960s by the Dutch company, Philips. A combination radio and compact cassette player, it had recording and playback functions as well as a carrying handle. While it was generally thought of as the first device that could be accurately called a “boombox,” the Norelco failed to gain mass traction. The core issue wasn’t due to poor performance from a technological standpoint, but rather the bad sound quality of the tapes. In 1965, the American engineer Ray Dolby invented the Dolby Noise Reduction system, which led to clean, hiss-free sound on compact cassette tapes. His invention sparked a revolution in hi-fi cassette audio.
The ubiquitous compact cassette tape.
In the early 1970s, Japanese manufacturers began to make advancements in boombox technology as an outgrowth of modular hi-fi stereo components. Living spaces in Japan were typically small, and there was a desire to condense electronics into compact devices without losing sound quality.
Later that decade, the improved boombox made its way to the United States, where it was embraced by hip hop, punk, and new wave musicians and fans—many of whom lived in large cities like New York and Los Angeles. In many ways, the boombox was a protest device, as youth culture used them to broadcast politically charged music in public spaces.
An early image of the Brooklyn Bridge and New York Skyline. THF113708
Boomboxes literally changed the sonic fabric of cities, but this effect was divisive. By the mid-1980s, noise pollution laws began to restrict their use in public. The golden years of the boombox were also short lived due to the rising popularity and affordability of personal portable sound devices like the Sony Walkman (and later, the MP3 player), which turned music into a private, insular experience.
This boombox was built for the street, and it is meant to be played loud. Its design is rugged, with a carrying handle and protective “roll bars” in case it is dropped. Many classic photos from the early years of hip-hop depict fans and musicians carrying the El Diablo around cities and on the subway in New York.
The JVC RC-550 is a member of what sound historians refer to as the “holy trinity” of innovative boomboxes. While the origins of its “El Diablo” nickname are uncertain, it is believed to stem from the impressive volume of sound it can transmit—or its flashing red sound meters. It is a monophonic boombox, meaning that it has one main speaker and it is incapable of reproducing sound in stereo. A massive offset 10-inch woofer dominates its design, coupled with smaller midrange and tweeter speakers. As with most boomboxes of this time, bass and treble levels could be adjusted.
An input for an external microphone led to the RC-550 being advertised as a mobile personal amplifier system. Brochures from the Japanese version show the boombox being used by salesmen to amplify their pitches in front of crowds, as a sound system in a bar, and by a singing woman accompanied by a guitarist. Recording could take place directly through the tape deck, or through the microphone on top, which could be rotated 360-degrees.
JVC 838 Biphonic Boombox The JVC 838 is important for its transitional design. It was one of the first boomboxes to incorporate the symmetrical arrangement of components that would become standard in 1980s portable stereos: visually balanced speakers, buttons and knobs, and a centered cassette deck.
As boombox designs evolved, they began to include (almost to the point of parody) sound visualization components such as VU meters and other electronic indicators. In many cases, these were purely for visual effect rather than function. The needle VU meters on the JVC 838 however, were accurate.
A unique feature of the JVC 838 boombox is its “BiPhonic” sound—a spatial stereo feature that creates a “being there” effect through its binaural speaker technology, resulting in “three-dimensional depth, spaciousness, and pinpoint imaging.” The box also includes an “expand” effect to widen the sound even further.
Sharp GF-777 “Searcher.” THF177382 Sharp “Searcher” GF-777 The Sharp “Searcher” GF-777 is an exercise in excess. Often referred to as the “king of the boomboxes,” it was also one of the largest ever produced. Weighing thirty pounds (minus ten D-cell batteries) and measuring over one foot tall and two feet wide, it took a certain amount of lifestyle commitment to carry this device around a city.
The Searcher played a key part in the performance and representation of hip-hop music. Its six speakers include four woofers individually tuned for optimal bass transmission and amplitude. It appeared in a photograph on the back cover of the first Run-DMC album, found its way into several music videos, and was photographed alongside breakdancing crews.
Many people used this boombox as an affordable personal recording studio. Two high quality tape decks opened the possibility for people to create “pause tapes” – a way of creating looped beats through queuing, recording, rewinding, and repeating a short phrase of music. A microphone input and an onboard echo effect meant people could rap or sing over top of music backing tracks.
Much like Thomas Edison’s phonograph, the boombox came full circle, allowing people to record and play back music for public and communal consumption. And while they may not mesh with our ideas of what a “mobile” device is in our age of smartphones and streaming services, their reach permeated popular culture in the 1970s well into the 1990s. Sometimes acting as portable sound systems, sometimes used as affordable personal recording studios—carrying a boombox through the streets (wherever you happened to live) was as much a fashion statement and lifestyle choice as it was a celebration of music and social technology.
Kristen Gallerneaux is Curator of Communications and Information Technology at The Henry Ford.
This full-color, large-format book is a compilation of Buster Brown comic strips that originally ran in the New York Herald in 1903 and 1904.THF297428
You may not know his name, but you’re likely familiar his work. Richard Outcault, a talented comic illustrator with a keen eye for marketing, found his ultimate success with the character Buster Brown in the early 1900s.
Born in Lancaster, Ohio, in 1863, Richard Felton Outcault showed an early interest in art. As a teenager, he attended the McMicken School of Design (now the Art Academy of Cincinnati) and found work painting decorative scenes for a Cincinnati safe manufacturer. By 1889, Outcault had taken a position as an artist at Thomas Edison’s West Orange, New Jersey, laboratory, working primarily on corporate exhibitions.
Richard Outcault created this illustration for Edison’s exhibit at the 1889 Exposition Universelle in Paris. It depicts the Menlo Park laboratory complex in 1879, when Edison first demonstrated his experimental lighting system. THF236600
Around 1890, Outcault left West Orange for New York City, where he began contributing mechanical drawings to technical publications like Electrical World and Street Railway Journal. He also submitted comic illustrations to some of the popular weekly humor magazines that had emerged in the 1880s, including Judge, Life, and Puck.
As public interest in comic publications grew, new advances in color printing technology became available, and newspaper publishers saw an opportunity to cash in. In 1893, the New York World introduced a weekly color comic supplement that, at first, reprinted illustrations from the humor magazines it mimicked. Richard Outcault joined the staff of the World as a cartoonist and published his first original comic for the paper in September 1894.
The Yellow Kid By 1896, one of the recurring characters in Outcault’s comics – a little baldheaded boy wearing a bright yellow nightshirt – had become a sensation. World readers began buying the paper every Sunday to check in on the adventures of the “Yellow Kid,” who the paper also licensed for merchandising. The Yellow Kid became the face of a wide range of products, from cigarettes and packaged foods to fashion accessories and household appliances.
The Yellow Kid’s popularity demonstrated the commercial value of comics and helped establish the medium as a newspaper fixture. Richard Outcault likely never benefitted directly from the licensing of the Yellow Kid – at that time, newspapers owned the rights to the images published in them, and copyright law didn’t protect characters – but he noted the marketing potential of a popular comic character.
Buster Brown With the success of the Yellow Kid, Outcault himself became something of a commodity. Demand for his comics kept him busy, and Outcault continued illustrating for several newspapers and magazines through the turn of the century. In 1902, he introduced Buster Brown, a mischievous 12-year-old boy from a well-heeled Manhattan family. Readers went crazy for Buster Brown’s shenanigans (and for his pet dog, Tige). Outcault had another hit on his hands.
Richard Outcault was a pioneer in the strip style of comic illustration, with sequential image panels and accompanying text (often in speech bubbles) that contributed to the narrative. By about 1900, this format had become standard for comics. THF297493
This time, he managed to profit from it. Though he never owned the legal rights to Buster Brown, Outcault licensed the character’s name and face to hundreds of companies. Buster Brown promoted everything from bread and cigars to toys and – perhaps most famously – shoes.
This bank is just one example of the hundreds of products manufactured during the first quarter of the twentieth century that bore Buster Brown’s likeness. Buster’s canine companion, Tige, sits at the horse’s feet. THF304975
The St. Louis-based Brown Shoe Company (now Caleres) is probably the best-known Buster Brown licensee. Buster and Tige promoted the Brown company’s shoes – commonly called “Buster Browns” – into the 1990s. THF297402
Americans purchased these branded products for decades after Outcault introduced Buster Brown. The character became a household name that outlived its comic strip, which was last published in 1921. By then, Richard Outcault was focusing less on illustrating and more on marketing. Eventually, he stepped away from comics altogether, returning to painting before his death in 1928. Eighty years later, the comic industry formally recognized Outcault’s important career, inducting him into its hall of fame at the 2008 San Diego Comic Convention.
Saige Jedele is Associate Curator, Digital Content at The Henry Ford